aluminium hydraulic high pressure single HGP-3A series gear pump

aluminium hydraulic high pressure single HGP-3A series good reputation, stable capability, good performace and servies

aluminium hydraulic high pressure single HGP-3A series

	HGP-3A series Feature
	1,	Maximum pressure250bar(3500psi)
	2,	Displacement cc/rev(in3/rev):6cc/rev-30cc/rev
	3,	Flange type SAE 2-bolt European & DIN 4-bolt
	4,	Advanced materialssmall,noiseless and stable in performance
Specification Model Disp.cc/rev(in3/rev) Max.Pressure kgf/cm2 Max revolution PortSizes Weight(Kg) Work Max Rate Max Min Out In HGP-3A-*6* 6 210(3000psi) 250(3500psi) 1800 3000 700 PT3/4 PT1/2 1.63 HGP-3A-*8* 8.4 1.65 HGP-3A-*11* 11 600 1.67 HGP-3A-*13* 13 1.69 HGP-3A-*14* 14.3 400 1.72 HGP-3A-*17* 16.5 1.75 HGP-3A-*19* 19.2 1.77 HGP-3A-*23* 23   HGP-3A-*25* 25 210(2000psi) 175(2500psi)   HGP-3A-*28* 28 PT1 PT3/4   HGP-3A-*30* 30 1.8
Dimensions
Performance Curve

Characteristics. This series of gear pumps and motors available in the form of size 4. Flow rates up to 1081pm, maximum pressure 250bar. Multi-joint combination can be, with a series of meet SAE, DIN, European standard mandrels, flanges and access port assembly form. . After processing of high tensile aluminum alloy body and anti-extrusion die front and back covers, to ensure high volumetric efficiency, mechanical efficiency and low noise characteristics. . Viton seal material of the parts can withstand high temperatures of operation. . The special design of oil-free bearings operating under high pressure. . Can be forward, reverse, reversing. . Synchronous motor can be more joint combination, to achieve more with cylinder synchronization purposes. Synchronization accuracy of 95%, than the average 70% better shunt valve. Technical Note hydraulic oil used. Department of petroleum-based hydraulic fluid, specifications meet the ISO or din standards. Other oil, please contact us. Oil temperature and viscosity. Environmental viscosity range: -15 °C -80 °C (5 °F -176 °F). Viscosity range: 12cSt-800cSt. Recommended viscosity: 16cSt-40cSt. Filtration precision: Suction side-60um; pressure side -10% 25um. Installation and driver. Installation and drive gear pump, must avoid the force of radial or vertical. . Even the shaft deviation angle must be set aside and maintained at 0.8 mm (0.003 ") TIR pressure within the oil port. Into the oil port of the minimum allowable pressure of 0.7bar. Minimum speed. Each type of the minimum allowable pressure: HGP-05A 800 rpm HGP-1A 500 rpm HGP-2A 500 rpm HGP-3A 500 rpm If other applications or products, please contact the company. . Using oil exceed 60 °C 140 °F. Motor and gear pump assembly when the non-horizontal. . Self-change when turning or internal parts. Part of the special requirements of materials, such as oil seals, 0-ring or around the cover.

aluminium hydraulic high pressure single HGP-3A series gear pump